QUALITY AUSTRALIAN-MADE STATIC OVERBELT MAGNET
Introducing a safer option!
Pulling large tramps off an Overbelt Magnet or Tramp Iron Magnets, as they are sometimes called is a task in itself. There is a high risk of hand injury as the metal is often sharp, and a lot of force is required to remove it from the magnet.
MSA has offered easy-to-discharge Tramp Iron Magnets for many years now with growing demand since the 2016 Report “In Safe Hands” The State of Hand Protection in Australia, compiled by the National Safety Council of Australia Foundation and Ansell.
Our Stainless-steel drawers make cleaning operations simple and safe. The drawer can be easily pulled out from under the magnet, and the collected tramps will fall from the magnetic field for an easy and safe collection (shown in the below video). Quality bearings are used to prevent the collected tramps from pinning the drawer to the magnet, and a stopper is in place to prevent the drawer from opening too far and falling.
Imported magnets trying to copy our concept usually have more rudimentary designs without bearings and stoppers. These basic copies often result in the captured tramp pinning their drawer to the bottom of the magnet. MSA has seen drawers that open over the belt which discharge back into the burden, instead of being discharged off to the side of the conveyor belt, as our Overbelts do.
A truly dependable means of tramp metal extraction:
- These Australian-made units are installed over conveyors to remove unwanted iron and steel items, such as machinery damaging roof bolts, bucket teeth, or product contaminating items like fencing wire, screws, staples, and other steel items.
- Eyelets are rated for shear loads allowing flexibility in your install.
- All MSA units conform to current engineering standards and best practices.
- Large stockholding, rapid delivery of spares and components.
This video explains the difference between an Australian Made and an Import Overbelt Magnet:
Manufactured in Australia, the Static Over-belt Suspension Magnets are high-quality and durable machines. They are designed to provide low maintenance and effective metal separation. Protect yourself and others from injury with our quality, easy, and safe-to-discharge magnet from MSA Magnetics.
Let us know your needs by contacting us here, or call our friendly team on 1800 466 246.
“Waglass has the contract to process all of the glass from the WA Container Deposit Scheme. The Waglass Plant at Bassendean in WA is a highly specialised plant containing over 60 items of equipment. The plant processes and sorts all of the glass collected from WA CDS into three colours of glass which is containerised and shipped to Orora’s bottle making facility in SA for direct feed to their furnaces.
There are strict quality standards required by Orora for the product we produce. Amongst them is that ferrous metal levels must be below 0.1g/100kg. To achieve this standard, a Magnetic Head Pulley was purchased from MSA Magnetics in September 2020 and it has been operating in our plant for the last 12 months. During that period, we have extracted several tonnes of ferrous metal using this Pulley, and at no point have we found any ferrous metal in our finished product.
We have since purchased a second unit from MSA in case of breakdown, but to date have had no reason to use it.
We have no hesitation in recommending MSA regarding the quality of their products and service”.
For high-quality Magnetic Pulleys, contact our team here for more information.
MSA RARE EARTH MAGNETIC HEAD PULLEYS!
With up to 4 times more power than commonly available Ceramic/Ferrite Pulleys, our Australian Made Rare Earth Pulleys are changing the face of Metal Separation in Australia.
The 4000-6000 Gauss surface intensity makes this option suitable for many applications where product purity and machine protection are both required, for example, Hay Processing and Rock Crushing, or where high-tonnage is being processed with low-density metal contamination, for example, Glass Recycling Plants.
- MSA can supply complete new Magnetic Head Pulleys or can convert your existing Pulley, meaning large cost savings.
- Local support and expertise means you can count on our quality and availability of locally manufactured replacement parts such as Stainless Steel wear cappings.
- A value for money way to automate and save yourself time and potential hand injuries with this Self-cleaning option.
- Our Aussie Made Rare Earth Pulleys are so powerful that they can be used in some applications that are historically only handled by Over-belt Magnets, making this truly a value for money proposition at point of purchase. Requiring less maintenance than Self-cleaning Over-belts, the decision becomes even easier!
Contact us today! P: (02) 4272 8180 E: firstname.lastname@example.org
For efficient extraction of ferrous and tramp metals from conveyed product streams.
Suited to non-food related industries such as recycling and mining, overbelt and suspension magnets offer a safe, efficient, and effective method of removing ferrous tramp and iron pieces. The magnets are installed above conveyed product streams and extract contaminating ferrous and tramp metal as the belt proceeds past – thus improving product purity and reducing equipment damage.
Commonly extracted ferrous contaminants from these types of installations include nails, screws, nuts, bolts, wire, chain, hammers, and crowbars – all of which can cause thousands of dollars in equipment damage if not removed early in the process.
- Improve product purity
- Prevention of damage to expensive downstream machineries such as shredders, crushers, mills, pulverizers, and grinders
- Prevention of damage, and the consequent costly repair and downtime, to conveyor belts cause by sharp metal pieces – this is especially a risk at discharge points
- Low-maintenance and self-cleaning designs available
- Reduction of downtime, maintenance, and repair costs to damaged downstream equipment, caused by the entry of tramp metal
- Cost of product rejection through failure to remove metal inclusions
- Potential savings from avoiding unnecessary landfill
- Mining operations including washeries
- Recycling plants
- Resource recovery
- Plastic operation
- Glass cullet recycling
- Shipping ports, ship loading
- Fertilizer manufacturing
- Power stations
- Wood chip & timber waste recycling
- Bulk materials handling & conveying
- Mobile crushers, screens, & shredders
- MRF (Material Recovery Facility) plants
- Auto & appliances recycling
- Municipal solid waste
- Kerbside collection and skip waste recycling
- Tyre & rubber recycling
- Electronics recycling/e-scrap
- Shredded steel
- Cement manufacturing
- Concrete batching plants
- Bulk sand and soil handling
Overbelt and suspension magnets can be installed over the top of the conveyor (cross-belt style) or at the end of the conveyor at discharge location (inline style).
Overbelt and suspension magnets are available in either permanent magnetic or electromagnetic designs. Each design has its own benefits and can include quick or self-cleaning methods.
|ADVANTAGES OF ELECTRO-MAGNETS||ADVANTAGES OF PERMANENT MAGNETS|
Overbelt Magnets consist of a magnet box surrounded by a continuously moving belt. The magnet is installed above the product stream conveyor, either mid-stream or at the conveyor discharge. As the product stream travels under the overbelt magnet, ferrous and tramp iron pieces are extracted and retained to the magnetic belt. The belt proceeds around the overbelt magnet housing. When it reaches the point at which it is no longer affected by the magnetic field, the collected metal is discharged and dropped off into collection bins.
Overbelt Magnets are popular due to their self-cleaning operation, which allows interrupted metal extraction and eliminates the need for operator cleaning schedules. They are also suited to applications where the typical level of ferrous contamination is high.
Suspension Magnets are a much simpler design than Overbelt Magnets. They consist of a block magnet (square, rectangular, or round) suspended above the conveyor with chains. The magnet face is positioned directly above the product stream, either cross-belt or inline (above conveyor discharge).
Regardless of whether Suspension Magnets are of permanent or electromagnetic design, there is usually manual labor involved in the cleaning process. The magnet must be shifted away from the conveyor before the collected metal is removed, otherwise, it may drop back into the product stream and cause recontamination. Because this manual labor is required, Suspension Magnets are typically selected for applications where the level of ferrous contamination is low and only occasional cleaning is required.
MSA also supply complete new magnetic pulley systems and magnetic pulley lagging for existing pulley magnets. These systems are installed at the discharge terminus of a conveyor and are used to effectively separate magnetic contaminants from the main non-magnetic product stream.
QUALITY AUSSIE-MADE MACHINES
Overbelt and Suspension Magnets available from MSA are high-quality, durable machines manufactured in Australia. They conform to current engineering standards and best practices. They are designed to provide low maintenance, effective metal separation.
Contact our magnet experts today for your magnetic needs!
Magnetic Head Pulleys operate much the same as non-magnetic Head Pulleys, except that the metal pieces are discharged separately to the non-magnetic product stream.
As the product stream reaches the conveyor discharge point, ferrous metal is attracted to the pulleys magnetic field and held to the belt. As the belt moves around the pulley, the non-magnetic material is discharged in a normal trajectory, however, the ferrous metal is still held to the belt.
When the belt passes out of the magnetic field, the magnetic material drops off into a separate chute or bin to the rest of the product. A non-magnetic splitter may be installed to separate the two discharges.
Ferrous metals commonly extracted from the product stream include nails, nuts, bolts, wire, cans, screws, tools, and so on.
MSA can supply complete new Magnetic Head Pulleys or can fit Magnetic Lagging Strips to your existing Pulley.
The addition of Magnetic Lagging Strips to your existing Pulley is not only a cost-effective solution (as opposed to purchasing a complete new Pulley System), but also assists with conveyor belt tracking. The lagging will only cause a small increase in the weight and diameter of the existing pulley.
Let us help you find out.
MAGNETS FOR WASTE AND RECYCLING FACILITIES
The recovery of metal from waste materials is extremely important for the recycling industry.
The filtering out and extraction of metals has 3 main purposes –
- Resource Recovery – Metals can be reused. They are often remelted and reshaped into new products.
- Product Purification – Waste products such as timber and glass are more suitable for recycling after tramp metal has been removed.
- Plant Protection – Tramp metal can cause damage to expensive recycling equipment if not removed (e.g. plastic granulators).
METAL SEPARATION EQUIPMENT
Metal separation equipment such as Eddy Current Separators, Overbelt/Suspension Magnets, and Pulley Magnets are used in recycling and waste facilities to extract metal pieces from the products.
Commonly extracted metals include:
- Ferromagnetic particles such as iron, steel, and work-hardened stainless steel (SS). These are usually extracted by Overbelt Magnets or Pulley Magnets.
- Nonferromagnetic particles such as aluminium and copper along with inert materials. These are extracted by Eddy Current Separators.
Often a number of separators are installed in various strategic locations around a plant. This ensures that both types of metals are removed and the risk of metal contamination is minimized.
Overbelt and Suspension Magnets are installed above belt conveyors to magnetically lift ferrous metal pieces out of the product stream. Contaminants are held against the magnet until cleaned (manual and self-cleaning designs are available).
Click here for more information on overbelt magnets
Magnetic Head Pulleys operate at the discharge of belt conveyors. As waste is dropped off the end of the belt, the metal that may be on the belt, under the burden of material, is held by the magnetic energy of the pulley and dragged around by the belt underneath the conveyors and dropped off into another bin. Magnetic Head Pulleys are ideal as a secondary complimentary magnet downstream of overbelt/suspension magnets.
MSA can provide new magnetic head pulleys or can transform your existing head pulleys to a highly magnetic pulley using MSA’s patented magnetic lagging system.
Click here for more information on magnetic head pulleys
Eddy Current Separators are essential in material recycling facilities and other general dry waste processing plants. They are used for the removal of non-ferrous metals from dry waste streams. They are typically part of the final stage of the process, removing the non-ferrous materials from the remaining plastics and small fragments of paper/cardboard.
It is critical when dealing with unsorted recyclables to utilize magnetic screening upstream from the Eddy Current Separator (ECS). The ECS, unless it has an incorporated Drum Magnet, cannot remove ferrous materials. It is ideal to have magnetic screening upstream from the ECS to reduce load and wear and tear on the ECS.
RECYCLING AND WASTE APPLICATIONS
Magnetic separators are often used to filter out metal pieces from waste applications such as –
- Construction and demolition debris. Asphalt, bricks, concrete, plasterboard, timber, building waste, and other excavated demolition waste is often contaminated with metal pieces – from large pieces of concrete reo, wear plates, and bucket teeth, to smaller items such as nails, nuts, and bolts. These contaminants must be removed before the demolition material is processed to be used for pavements, earthworks, and drainage, amongst other uses.
- Material Recovery Facilities (MRF). All the stuff you’d find in a yellow recycling bin.
- Glass. Glass fines can be used as a replacement for virgin sand when manufacturing new glass objects, or for civil construction projects such as in the embedment of residential sewerage pipes and water mains – concrete aggregate and cement mix. It is essential that metal contamination is removed before it becomes an issue.
- Timber recycling such as utility poles, cable spools, and pallets. The need for high-quality timber products means that recycling timber is now more useful and viable than disposing it at landfill or using it as fuel. Wooden pallets are mostly recycled for poultry bedding. Timber products must be inspected for metal pieces such as nails and bolts before processing, otherwise, equipment is damaged easily.
- Tyres and rubber
- General waste
- Shredder floc
The Australian Government has committed to working with the Environment Protection Authority (EPA) over 9 years to assist in maintaining a clean environment and reducing landfill. Funding has been made available, through grants, to all sectors of the recycling industry to help improve best practice systems.
This includes funding for waste and resource recovery initiatives, such as improved recycling facilities. New and improved recycling infrastructure and equipment will allow waste processors to develop more innovative and efficient methods for processing materials.
A key target of the EPA is to increase the amount of waste processed and decrease the amount of waste sent to landfill by 75%. The EPA is aiming to increase the reuse, recycling, and reprocessing of materials such as timber, cardboard/paper, plastics, and packaging. Processed waste must therefore be high quality and free of any contaminants, such as metal pieces, that will have a negative effect on the recycling process and potentially damage plant equipment.
Between 2017-21, the NSW EPA initiative, ‘Waste Less Recycle More’ has allocated a total of $48 million to improving recycling infrastructure. Similarly, the Victorian Sustainability Fund has allocated $30.4 million to waste and resource recovery.
Magnets and Eddy Current Separators are critical components in any resource recovery application. Improvements to ferrous and non-ferrous metals sorting lines are able to be considered for partial funding under these current EPA grants.
Waste Initiatives have partnered with MSA to assist recycling companies’ with collecting unwanted tramp iron and metal pieces from their waste product lines.
Based in Singleton NSW, Waste Initiatives are leading suppliers of quality recycling solutions including balers, shredders, and compactors. They are also approved resellers of MSA equipment.
Magnetic separators are available direct through MSA, or from Waste Initiatives.
MSA Magnetics offers full-service support to all Waste Initiatives Magnet customers, so no matter who you decide to buy MSA products through you are covered!