Your source for force

MSA Magnetics Newsfeed

Magswitch No-Touch Tools

Image Caption

MSA Magnetics provides a wide range of tools to improve the safety, efficiency, and productivity of industrial operations in the metal fabrication, lifting, and woodworking industries. The Magswitch magnets have many advantages, ranging from safety benefits to reducing of downtime. These switchable magnets also have durability and speed on their side.

More and more companies are looking to reduce hand injuries by prohibiting employees and contractors from using their hands to guide loads around their factories and trucks. As this “No-Touch” Policy has become mainstream, MSA Magnetics has been approached by many companies to supply No-Touch Tools for guiding steel objects under load.

MSA’s No-Touch Tools allow the performer to work safer and be more productive as the tools help save hand and back injuries, and save time! The line-up consists of:

Magswitch Extenda-Lifts: Allows users to pick up and move hot, sharp, and dirty steel without bending over and using their hands.

Extenda-Lift 600

 

 

 

 

 

 

 

Magswitch Hand Lifters: Ideal for small steel handling, dragging sheet, picking, placing and pulling parts out of burn table or handling scrap, without using your hands.

Hand Lifter 60-M

 

 

 

 

 

 

 

Magswitch MagDolly: This product has large solid rubber wheels and is suited to lift and carry sheet, pipe or any steel object over a greater distance. Again, no need to bend over or use your hands.

MagDolly

 

 

 

 

 

 

 

The range doesn’t end there… We are the industrial magnet experts. If your requirements have anything to do with magnets, we can provide the solution that works – Contact us today!

Leave Reply

Find Your Nearest Distributor

Your source for force

MSA Magnetics Newsfeed

Are you serious about safety?

Image Caption

Are you serious about safety? We are. So we’ve developed a range of high-quality magnetic solutions designed to hold your cables and power cords up off the floor. These magnets are an effective and inexpensive way to not only prevent trip hazards, but also tidy up your work areas! The range includes the MSA Cable-Mate, Cable-Buddy, and Powr-Safe Lead Holder Magnets.

The tools are easy to use. Each of the magnetic lead holders feature a high-strength rare earth magnet which will hold to any flat magnetic steel surface. Simply attach the magnet to the magnetic surface and redirect the cable through the tool.

SAFETY ADVANTAGES:

  • Keeps floor spaces and/or work areas tidy
  • Provides a safer working area
  • Assists in meeting WHS obligations
  • Greatly reduces the risk of slips, trips, falls, and injury
  • Reduces the risk of electrocution by holding cables up and out of wet areas

COST BENEFITS:

Protects cables/hoses from machine & foot traffic, resulting in return on investment by ensuring:

  • Less wear/damage
  • Longer lifespan of cables
  • Reduced maintenance costs in repairing/replacing damaged cables
  •  

PRODUCTIVITY ADVANTAGES:

  • Fast, no-fuss rerouting of cables (time-saving)
  • Ability to organise and store cables in a safe practical location
  • Although strong, they are easy to remove and place elsewhere
  • Holds cables out of the working area, providing ease of working.
    •  

So if you’re as serious about workplace safety as we are, you can learn more or purchase these magnets here…or you can contact our friendly team here if you have any questions.

Leave Reply

Find Your Nearest Distributor

Your source for force

MSA Magnetics Newsfeed

How Do Magnetic Head Pulleys Work?

Image Caption

Magnetic Head Pulleys operate much the same as non-magnetic Head Pulleys, except that the metal pieces are discharged separately to the non-magnetic product stream.

As the product stream reaches the conveyor discharge point, ferrous metal is attracted to the pulleys magnetic field and held to the belt. As the belt moves around the pulley, the non-magnetic material is discharged in a normal trajectory, however, the ferrous metal is still held to the belt.

When the belt passes out of the magnetic field, the magnetic material drops off into a separate chute or bin to the rest of the product. A non-magnetic splitter may be installed to separate the two discharges.

Ferrous metals commonly extracted from the product stream include nails, nuts, bolts, wire, cans, screws, tools, and so on.

Image.

PULLEY LAGGING

MSA can supply complete new Magnetic Head Pulleys or can fit Magnetic Lagging Strips to your existing Pulley.

The addition of Magnetic Lagging Strips to your existing Pulley is not only a cost-effective solution (as opposed to purchasing a complete new Pulley System), but also assists with conveyor belt tracking. The lagging will only cause a small increase in the weight and diameter of the existing pulley.

Image

 

For more information view our product here, or contact our friendly team today.

Leave Reply

Find Your Nearest Distributor

Your source for force

MSA Magnetics Newsfeed

MSA Stock Feed Magnet Retrieval System

Image Caption

Foreign tramp iron and metal fragments in stock feed can cause injuries to farm animals and handlers, cause customer complaints, and can also damage expensive processing equipment.

MSA’s Stock Feed Magnet Retrieval Systems comprises of powerful Overbelt Suspension Magnets and Magnetic Head Pulleys. Used in combination, these two magnets have numerous advantages, some of which include:

  • Help maintain and increase the value of the stock feed
  • Increase product purity and final product protection
  • Reduce liability
  • Protect expensive processing equipment, such as chaft cutters
  • Protect livestock from injury

The MSA Stock Feed Magnet Retrieval Systems have been known to reduce reject bales by 75-90% and customers have reported filling at least 1 x 44-gallon drum with recovered tramp metal within one month.

OVERBELT SUSPENSION MAGNET

Image of MSA Overbelt Suspension Magnet

    • -Australian Made
    • -Engineered for use in stock feed production
    • -Weather resistant
    • -Scalping magnet easily discharged using proprietary stainless-steel draw system
    • -Cost-effective long-life option for steel separation

 

 

MAGNETIC HEAD PULLEY

Image of MSA Magnetic Head Pulley

    • -High energy RE80 Rare Earth magnets
    • -Design assists with conveyor belt tracking
    • -Reduces belt damage
    • -Highly effective magnetic field design for maximum lower burden penetration

MSA Magnetics can supply complete new Magnetic Head Pulleys or can convert your existing Head Pulleys into Magnetic Head Pulleys.

Contact MSA Magnetics

For more information on how you can reduce tramp metal in your stock feed production, or to request a quotation, please contact the MSA team of engineers.

Leave Reply

Find Your Nearest Distributor

Your source for force

MSA Magnetics Newsfeed

Does Your Plant Upgrade Qualify For EPA Funding?

Image Caption

Let us help you find out.

MAGNETS FOR WASTE AND RECYCLING FACILITIES

The recovery of metal from waste materials is extremely important for the recycling industry.

The filtering out and extraction of metals has 3 main purposes –

  1. Resource Recovery – Metals can be reused. They are often remelted and reshaped into new products.
  2. Product Purification – Waste products such as timber and glass are more suitable for recycling after tramp metal has been removed.
  3. Plant Protection – Tramp metal can cause damage to expensive recycling equipment if not removed (e.g. plastic granulators).

 

METAL SEPARATION EQUIPMENT

Metal separation equipment such as Eddy Current Separators, Overbelt/Suspension Magnets, and Pulley Magnets are used in recycling and waste facilities to extract metal pieces from the products.

Common extracted metals include:

  • Ferromagnetic particles such as iron, steel, and work hardened stainless steel (SS). These are usually extracted by Overbelt Magnets or Pulley Magnets.
  • Nonferromagnetic particles such as aluminium and copper along with inert materials. These are extracted by Eddy Current Separators.

 

Often a number of separators are installed in various strategic locations around a plant. This ensures that both types of metals are removed and the risk of metal contamination is minimized.

Overbelt and Suspension Magnets are installed above belt conveyors to magnetically lift ferrous metal pieces out of the product stream. Contaminants are held against the magnet until cleaned (manual and self-cleaning designs are available).
Click here for more information on overbelt magnets.

MSA Overbelt & Suspension Magnet Diagram

Magnetic Head Pulleys operate at the discharge of belt conveyors. As waste is dropped off the end of the belt, the metal that may be on the belt, under the burden of material, is held by the magnetic energy of the pulley and dragged around by the belt underneath the conveyors and dropped off into another bin. Magnetic Head Pulleys are ideal as a secondary complimentary magnet downstream of overbelt/suspension magnets.

MSA can provide new magnetic head pulleys or can transform your existing head pulleys to a highly magnetic pulley using MSA’s patented magnetic lagging system.
Click here for more information on magnetic head pulleys

Magnetic Head Pulley Diagram

Eddy Current Separators are essential in material recycling facilities and other general dry waste processing plants. They are used for the removal of non-ferrous metals from dry waste streams. They are typically part of the final stage of the process, removing the non-ferrous materials from the remaining plastics and small fragments of paper/cardboard.
Click here for more information on Eddy Current Separators

MSA Eddy Current Separator Diagram

It is critical when dealing with unsorted recyclables to utilize magnetic screening upstream from the Eddy Current Separator (ECS). The ECS, unless it has an incorporated Drum Magnet, cannot remove ferrous materials. It is ideal to have magnetic screening upstream from the ECS to reduce load and wear and tear on the ECS.

RECYCLING AND WASTE APPLICATIONS

Magnetic separators are often used to filter out metal pieces from waste applications such as –

  • Construction and demolition debris. Asphalt, bricks, concrete, plasterboard, timber, building waste, and other excavated demolition waste is often contaminated with metal pieces – from large pieces of concrete reo, wear plates, and bucket teeth, to smaller items such as nails, nuts, and bolts. These contaminants must be removed before the demolition material is processed to be used for pavements, earthworks, and drainage, amongst other uses.
  • Material Recovery Facilities (MRF). All the stuff you’d find in a yellow recycling bin.
  • Glass. Glass fines can be used as a replacement for virgin sand when manufacturing new glass objects, or for civil construction projects such as in the embedment of residential sewerage pipes and water mains – concrete aggregate and cement mix. It is essential that metal contamination is removed before it becomes an issue.
  • Timber recycling such as utility poles, cable spools, and pallets. The need for high-quality timber products means that recycling timber is now more useful and viable than disposing it at landfill or using it as fuel. Wooden pallets are mostly recycled for poultry bedding. Timber products must be inspected for metal pieces such as nails and bolts before processing, otherwise, equipment is damaged easily.
  • Tyres and rubber
  • Scrap
  • General waste
  • Shredder floc

 

EPA GRANTS

The Australian Government has committed to working with the Environment Protection Authority (EPA) over 9 years to assist in maintaining a clean environment and reducing landfill. Funding has been made available, through grants, to all sectors of the recycling industry to help improve best practice systems.

This includes funding for waste and resource recovery initiatives, such as improved recycling facilities. New and improved recycling infrastructure and equipment will allow waste processors to develop more innovative and efficient methods for processing materials.

A key target of the EPA is to increase the amount of waste processed and decrease the amount of waste sent to landfill by 75%. The EPA is aiming to increase the reuse, recycling, and reprocessing of materials such as timber, cardboard/paper, plastics, and packaging. Processed waste must therefore be high quality and free of any contaminants, such as metal pieces, that will have a negative effect on the recycling process and potentially damage plant equipment.

Between 2017-21, the NSW EPA initiative, ‘Waste Less Recycle More’ has allocated a total of $48 million to improving recycling infrastructure. Similarly, the Victorian Sustainability Fund has allocated $30.4 million to waste and resource recovery.

Magnets and Eddy Current Separators are critical components in any resource recovery application. Improvements to ferrous and non-ferrous metals sorting lines are able to be considered for partial funding under these current EPA grants.

WASTE INITIATIVES

Waste Initiatives have partnered with MSA to assist recycling companies’ with collecting unwanted tramp iron and metal pieces from their waste product lines.

Based in Singleton NSW, Waste Initiatives are leading suppliers of quality recycling solutions including balers, shredders, and compactors. They are also approved resellers of MSA equipment.

Magnetic separators are available direct through MSA, or from Waste Initiatives.

MSA Magnetics offer full-service support to all Waste Initiatives Magnet customers, so no matter who you decide to buy MSA products through you are covered!

MAKE AN ENQUIRY

Have a need regarding tramp iron and metal removal in your recycling facility? Contact us today for assistance and a quote on high-quality magnetic separation equipment.
Click here to contact us

Leave Reply

Find Your Nearest Distributor

Your source for force

MSA Magnetics Newsfeed

Magnet Solution Helps Council Keep Our Beaches Clean!

Image Caption

How do you help keep your beaches clean?

In the busy seasons (such as summer) beaches are filled with soda cans, bottles, and general litter from beach-goers…so who cleans it up?

It’s often left up to the City Council who do a tremendous job of cleaning up after everyone. Rather than bending over and hand-picking up each individual piece of rubbish (extremely time-consuming), they use a large machine called a beach rake. The beach rake is towed behind a tractor and collects rubbish from the sand with the help of many steel tines mounted on a conveyer belt.

But there is a problem.

These tines tend to get caught up in the rubbish and end up back in the sand. Not only are they expensive to replace, but the tines create their own form of litter which causes the beach rake to become less effective and leave MORE litter behind! Not to mention, tines are sharp & dangerous – they pose a huge public safety risk if they’re left lying in the sand!

The tines can be clipped back on…but first there needs to be a way of collecting them!

With this problem in mind, an Eastern Sydney Council contacted MSA, who came up with an effective solution. MSA provided them with a large permanent magnet, which was placed on the bottom of the beach rake. As the tines pop off, the magnet immediately collects them from the sand and holds them securely until an operator removes them. The tines are then simply and easily clipped back into the rake and it’s ready to go again!

The magnet solution holds a lot of benefits for the council:

  • Quick and easy install
  • Prevents loss of expensive tines…money saver!
  • Allows for a more effective collection of litter…the more tines missing, the more litter missed!
  • A cost-effective, easy fix, high-quality solution…minimal fuss for council workers!
  • Collects metal contamination missed by the rake.

 

Image of Magnet for Beach Rake

MSA enjoyed working with the council on this project and helping them keep our beaches clean. Come summertime, we won’t need to worry about stepping on sharp nasty tines, and we can enjoy a clean beach in peace!

That’s not to say we can just freely leave litter around knowing that someone will clean it up…so do your bit and don’t be a ‘tosser’!

Have a metal contamination problem that needs solving? You know who to contact! We’re passionate about our magnet solutions and solving customer needs (be they big or small) and we’d love to hear from you!

Leave Reply

Find Your Nearest Distributor

Your source for force

MSA Magnetics Newsfeed

Magnetic Pulley Lagging For Waste Initiatives

Image Caption

MSA were recently contacted by a recycling company Waste Initiatives. They had a client who needed prompt assistance with collecting unwanted tramp iron and metal fragments in their waste production lines.

After assessing their application and a number of possible solutions, it was decided that the most effective action to take was to install a high intensity, rare earth magnet pulley. The company had an existing head pulley available so they sent it to MSA for the addition of their special ‘magnetic pulley lagging’.

This system causes no disruption to the process line, but instead of dropping contaminates into the same bin as the clean material, the pulley carries the contaminates underneath the conveyer belt and drops them off into separate bin underneath the head pulley.

This was met with high praise from Managing Director Peter Smith, who says “We recently needed a Magnetic Pulley with a very quick turnaround. When we started making enquiries, many companies couldn’t make one or import one in less than a month. We made contact with MSA Magnetics and couldn’t believe the difference! They discussed the situation with us and gained an understanding of what we needed to do. We were able to make a simple Pulley and ship to MSA overnight. They had promised a 3-day turnaround to convert the Pulley to a Magnetic Pulley… we had it back on a truck within 24 hrs! I have no hesitation in recommending MSA for their high level of expert and professional assistance and engineering, quality workmanship and most of all, exceptional service”.

MSA Magnetic Pulley Lagging
MSA Magnetic Pulley Lagging Diagram

MSA provides complete new magnetic head pulley solutions OR magnetic lagging upgrades to your existing pulleys, any width and any diameter above 150mm.

For more information view our product here, or contact our friendly team today.

Leave Reply

Find Your Nearest Distributor

Your source for force

MSA Magnetics Newsfeed

Bakery Lifting Problems Solved With Magswitch MLAY1000X4 Lifting Magnet

Image Caption

DO THE LIFTING PRACTICES IN YOUR FACTORY GIVE UNNECESSARY STRAIN TO YOUR WORKERS?

A large Sydney-based bakery (name withheld) recently contacted MSA regarding a problem they had with lifting large metal billets out of lathe chuck jaws in their maintenance workshop. The heavy 18+ kg billets were being transported by slings, a method which held many WHS risks:

  1. Unnecessary strain on staff as they bent at uncomfortable angles to remove the heavy billets.
  2. Risk of billet falling out of the sling due to insufficient holding surface area.
  3. Damage and wear to the slings posed a huge safety risk if they unexpectedly broke.
  4. Risk of billet falling out of the sling cradle due to it not being designed to hold a workpiece offset.

 

These slings would often lift between 20 – 500 kg of weight and although tested every 3-6 months, were still not considered the ‘best practice’ as manual loading of weights into the sling was still necessary.
The bakery researched the various types of lifting methods and concluded that the MAGSWITCH MLAY1000x4 heavy lifting magnet was the answer to their problems.

Bakery Lifting Magnet Solution MSA Magnet Sales Australia

The MLAY1000x4 is a switchable magnet that has been specially designed for use in workshop environments to aid in the lifting of heavy ferrous materials, with a holding strength of up to 591 kgs (1,300 lbs) with a 3:1 SWL. It is lighter and stronger than competitive shunting switchable magnets, eliminates the strain that the slings were causing the bakery workers and greatly reduces the WHS risks that the slings held.

The customer provided MSA with the justification document in which they highlighted the benefits the MLAY1000x4 held for their applications:

  • “Far less prone to damage and failure
  • Quick and easy setup and to operate
  • Can lift vertically instead of horizontally
  • Allow slings to be kept for machined work and non-ferrous handling, reduces wear and tear on the slings
  • Latest Safety two press finger latch to activate/de-activate magnet arm (prevents unintentional switched off)”

 

Bakery Lifting Magnet Solution MSA Magnet Sales Australia

Read the full Justification document here! 

After purchasing and installing their new Magswitch lifting magnet, the bakery workers now experience a much safer work environment, and it has increased productivity due to the decrease in time taken to lift the heavy billets.

They since have found use for the magnet loading/unloading raw materials from delivery trucks, again increasing their productivity while improving their WHS standard.

The Magswitch MLAY1000x4 is available for purchase from MSA Magnetics. Call (02) 4272 8180 or visit the MLAY1000x4 page on our website to find out more.

MSA Magswitch Lifting Magnet MLAY1000x4

Leave Reply

Find Your Nearest Distributor

Your source for force

MSA Magnetics Newsfeed

Cable Support Solution for Operating Theatres

Image Caption

Large & heavy-weighted cables have become a safety concern in many surgical & medical rooms. Last year, MSA Magnetics sold a number of Cable-Mates to an operating theatre in the Hunter Region, NSW. They attached these to their laparoscopic towers, instrument carts & trolleys which are now used to hold their cables & power leads securely out of harms way.

Image of MSA Cable-Mates in action at Operating Theatre

Graham Cutler, the Nurse Unit Manager of John Hunter Hospital says he “chanced on this product whilst looking for a product to hold onto cables & power leads in the operating theatres. The MSA Cable-Mate is well suited to the healthcare environment as it can be placed on most laparoscopic towers and cleaned to meet infection control guidelines. Highly recommended product”.

Cords, cables & hoses are a major OH&S concern, causing many workplace injuries. According to OSHA, most general industry incidents involve slips, trips, and falls. They cause 15% of all accidental deaths and are second only to motor vehicles as a cause of fatalities. The Cable-Mate has been proven to help create a safer workplace area & are perfect for storing & handling electrical cables, leads, hoses & wires in a practical position.

Cutler also says that “MSA’s level of customer service is excellent – they have responded to requests & questions quickly & efficiently in a very professional manner”.

Reduce trip hazard risks & increase workplace safety by using MSA’s Cable-Mate devices. For more information view our product here, or contact our friendly team today.

The Patented System is available in Australia, New Zealand & North America.

Leave Reply

Find Your Nearest Distributor