Your source for force
MSA Magnetics Newsfeed
How Do Magnetic Head Pulleys Work?
Magnetic Head Pulleys operate much the same as non-magnetic Head Pulleys, except that the metal pieces are discharged separately to the non-magnetic product stream.
As the product stream reaches the conveyor discharge point, ferrous metal is attracted to the pulleys magnetic field and held to the belt. As the belt moves around the pulley, the non-magnetic material is discharged in a normal trajectory, however, the ferrous metal is still held to the belt.
When the belt passes out of the magnetic field, the magnetic material drops off into a separate chute or bin to the rest of the product. A non-magnetic splitter may be installed to separate the two discharges.
Ferrous metals commonly extracted from the product stream include nails, nuts, bolts, wire, cans, screws, tools, and so on.
MSA can supply complete new Magnetic Head Pulleys or can fit Magnetic Lagging Strips to your existing Pulley.
The addition of Magnetic Lagging Strips to your existing Pulley is not only a cost-effective solution (as opposed to purchasing a complete new Pulley System), but also assists with conveyor belt tracking. The lagging will only cause a small increase in the weight and diameter of the existing pulley.
Find Your Nearest Distributor